Cevapla
 
Konu Seçenekleri
Eski 07-01-07, 02:16 Çevrimdışı   #1
Öğrenci
 
gioboys - ait Avatar
Genel Mesajlar: 8
Teşekkür etti: 2
Teşekkür edildi: 2
RepForum Gücü: 0
Forum Puanı:1
gioboys Herkese mesafeli
Pardusta usb modem sorunu

ArkadaşLar pardusu kurdum ama internete giriş yapamadığım için windows kullanıyorum zoom usb adsl modemim war bunuj pardus a nasıl kurucam yardımlarınızı bekliyorum
  Alıntı ile Cevapla
Eski 11-01-07, 02:00 Çevrimdışı   #2
Asistan
 
KaGaN - ait Avatar
Genel Mesajlar: 184
Teşekkür etti: 211
Teşekkür edildi: 94
RepForum Gücü: 10
Forum Puanı:1544
KaGaN üç beş tanıdığı olmuşKaGaN üç beş tanıdığı olmuşKaGaN üç beş tanıdığı olmuşKaGaN üç beş tanıdığı olmuşKaGaN üç beş tanıdığı olmuşKaGaN üç beş tanıdığı olmuşKaGaN üç beş tanıdığı olmuşKaGaN üç beş tanıdığı olmuşKaGaN üç beş tanıdığı olmuşKaGaN üç beş tanıdığı olmuşKaGaN üç beş tanıdığı olmuş
Açıklama

Bu kurulum ADSL Usb modem kullanıcıları için internete nasıl bağlanacağı belgesidir, minimum Pardus 1.1alfa2 gerektirir.

== Kurulum ayarları ==

Konsol'a girerek root girişi yapın. Ardından

# adsl-setup

yazın.

Örnek :

linux onur # adsl-setup
Welcome to the Roaring Penguin PPPoE client setup. First, I will run
some checks on your system to make sure the PPPoE client is installed
properly...

Looks good! Now, please enter some information:

USER NAME

>>> Enter your PPPoE user name (default pardus@ttnet):

Bu kısımda bağlantı için kullanıcı adınızı girin ve enter'a basın.

INTERFACE

>>> Enter the Ethernet interface connected to the DSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where 'n' is a number.
(default eth0):

"nas0" ( tırnaksız ) yazın ve enter'a basın şöyle olmalı

INTERFACE

>>> Enter the Ethernet interface connected to the DSL modem
For Solaris, this is likely to be something like /dev/hme0.
For Linux, it will be ethn, where 'n' is a number.
(default eth0): nas0

Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
>>> Enter the demand value (default 0):

Bu kısma "no" yazarak geçin. Şöyle olmalı :

Do you want the link to come up on demand, or stay up continuously?
If you want it to come up on demand, enter the idle time in seconds
after which the link should be dropped. If you want the link to
stay up permanently, enter 'no' (two letters, lower-case.)
NOTE: Demand-activated links do not interact well with dynamic IP
addresses. You may have some problems with demand-activated links.
>>> Enter the demand value (default 0): no

Ardından sorulan DNS bilgilerini enter'a basarak geçin.

DNS

Please enter the IP address of your ISP's primary DNS server.
If your ISP claims that 'the server will provide DNS addresses',
enter 'server' (all lower-case) here.
If you just press enter, I will assume you know what you are
doing and not modify your DNS setup.
>>> Enter the DNS information here:

Ve bağlantı şifrenizin istendiği kısma geldik

PASSWORD

>>> Please enter your PPPoE password: Buraya şifrenizi girin
>>> Please re-enter your PPPoE password: Buraya şifrenizin tekrarını girin

Örnek :

PASSWORD

>>> Please enter your PPPoE password: 01234567
>>> Please re-enter your PPPoE password:01234567

FIREWALLING

Please choose the firewall rules to use. Note that these rules are
very basic. You are strongly encouraged to use a more sophisticated
firewall setup; however, these will provide basic security. If you
are running any servers on your machine, you must choose 'NONE' and
set up firewalling yourself. Otherwise, the firewall rules will deny
access to all standard servers like Web, e-mail, ftp, etc. If you
are using SSH, the rules will block outgoing SSH connections which
allocate a privileged source port.

The firewall choices are:
0 - NONE: This script will not set any firewall rules. You are responsible
for ensuring the security of your machine. You are STRONGLY
recommended to use some kind of firewall rules.
1 - STANDALONE: Appropriate for a basic stand-alone web-surfing workstation
2 - MASQUERADE: Appropriate for a machine acting as an Internet gateway
for a LAN
>>> Choose a type of firewall (0-2):

Burada firewall seçeneğinizi seçin ve enter'a basın.

** Summary of what you entered **

Ethernet Interface: nas0
User name: pardus@ttnet
Activate-on-demand: No
DNS: Do not adjust
Firewalling: NONE

>>> Accept these settings and adjust configuration files (y/n)? y
Adjusting /etc/ppp/pppoe.conf
Adjusting /etc/ppp/pap-secrets and /etc/ppp/chap-secrets
(But first backing it up to /etc/ppp/pap-secrets-bak)
(But first backing it up to /etc/ppp/chap-secrets-bak)



Congratulations, it should be all set up!

Type 'pppoe-start' to bring up your PPPoE link and 'pppoe-stop' to bring
it down. Type 'pppoe-status' to see the link status.

Özet bilgileriniz görüntülendikten sonra bu kaydın yapılıp yapılması hakkındaki "Accept... configuration files(y/n)" sorusuna y harfine basarak onaylayın.
[düzenle]
Kurulum

Konsol'a tekrar root haklarıyla giriş yapın ve

br2684ctl -c 0 -b -a 8.35

yazın . Şöyle olmalı;

linux onur # br2684ctl -c 0 -b -a 8.35
br2684ctl[3475]: Interface "nas0" created sucessfully
br2684ctl[3475]: Communicating over ATM 0.8.35, encapsulation: LLC
br2684ctl[3475]: Interface configured

[düzenle]
Interneti bağlamak

Konsolda root hakları ile bağlıyken

# adsl-start

komutunu vererek internetinizi bağlayın.Bağlandığınızda Connected! şeklinde bir mesaj alacaksınız. Örnek :

linux onur # adsl-start
. Connected!

adsl-stop ile internet bağlantısını kesebilirsiniz:

linux onur # adsl-stop
Killing pppd (3522)
Killing pppoe-connect (3494)

Bağlantıyı tekrar bağlamak için ise

# adsl-start

komutunu vererek bağlayın. Örnek :

linux onur # adsl-start
. Connected!

NOT : her bilgisayarınızı yenıden baslattıgınızda

# br2684ctl -c 0 -b -a 8.35
# adsl-start

komutlarını vermelisiniz.
[düzenle]
Not

Sürekli olarak bu komutu girmek istemeyen arkadaşlar için yazıyorum

Onur@linux ~ $ sudo nano /etc/conf.d/local.start

yazarak daha önceden rc.local olarak adlandırılan dosyanın içine giriyoruz ve

# /etc/conf.d/local.start

# This is a good place to load any misc programs
# on startup ( use 1>&2 to hide output)

br2684ctl -c 0 -b -a 8.35
adsl-start

şeklinde değiştiriyoruz. Bu sayede bilgisayarınız açıldığında modem link veriyorsa eğer internete bağlandınız demektir.
[düzenle]
Mutlu Son

Artık internete bağlısınız.


(ç)Alıntıdır

No İngilizce, evet Türkçe..!
======
Haksızlığı Hak Zanneden Adamlara Karşı Hak Dava Etmek Bir Nevi Haksızlıktır, Hakka Karşı Hürmetsizliktir. Ben Bu Hürmetsizliği İrtikab Etmek İstemem.
  Alıntı ile Cevapla
Mesaja teşekkür eden:
ToutatiS (11-01-07)
Eski 15-01-07, 00:27 Çevrimdışı   #3
Öğrenci
 
gioboys - ait Avatar
Genel Mesajlar: 8
Teşekkür etti: 2
Teşekkür edildi: 2
RepForum Gücü: 0
Forum Puanı:1
gioboys Herkese mesafeli
eyw kardes saoL ama oLmuyo denedim bunu yada ben yapamadım.
  Alıntı ile Cevapla
Cevapla

Konu Seçenekleri

Yetkileriniz
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is Açık
Smileler Açık
[IMG] Kodları Açık
HTML-Kodları Kapalı
Trackbacks are Kapalı
Pingbacks are Kapalı
Refbacks are Kapalı

Powered by vBulletin Copyright © 2000-2008 Jelsoft Enterprises Limited.
SEO by vBSEO 3.2.0 ©2008, Crawlability, Inc.
http://www.zamansiz.com

Bütün Zaman Ayarları WEZ +2 olarak düzenlenmiştir. Şu Anki Saat: 20:20 .